|
PREDSTANDARD
april 2005
Gorniška oprema – Naprave za spuščanje - Varnostne zahteve in preskusne
metode
Mountaineering equipment - Descenders - Safety requirements and test methods
ICS 97.220.40 Referenčna številka
oSIST prEN 15151:2005(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN 15151
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS
English version
Mountaineering equipment - Descenders - Safety requirements
and test methods
Bergsteigerausrüstung - Abseilgeräte -
Sicherheitstechnische Anforderungen und Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 136.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15151:2005: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
prEN 15151:2005 (E)
Contents Page
Foreword.3
1 Scope.4
2 Normative references.4
3 Terms and definitions .4
4 Safety requirements.4
4.1 Design.4
4.2 Braking capacity.5
4.3 Strength.5
4.3.1 Descenders.5
5 Test methods.5
5.1 Conditioning.5
5.2 Examination of design .5
5.3 Determination of the braking capacity .5
5.3.1 Apparatus.5
5.3.2 Procedure.6
5.4 Determination of strength.7
5.4.1 Test of the attachment opening .7
5.4.2 Test of the braking par
...