|
SIST EN 13765:2011/kFprA1:2014
01-september-2014
3ODVWRPHUQHYHþVORMQH QHYXONDQL]LUDQH FHYLLQFHYQLSULNOMXþNL]DSUHWRN
RJOMLNRYRGLNRYWRSLOLQNHPLNDOLM6SHFLILNDFLMD
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of
hydrocarbons, solvents and chemicals - Specification
Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für
die Förderung von Kohlenwasserstoffen, Lösungsmitteln und Chemikalien - Spezifikation
Tuyaux et assemblages flexibles thermoplastique multicouches (non vulcanisés) pour le
dépotage d'hydrocarbures, solvants et produits chimiques - Spécifications
Ta slovenski standard je istoveten z: EN 13765:2010/FprA1
ICS:
83.140.40 Gumene cevi Hoses
SIST EN 13765:2011/kFprA1:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13765:2011/kFprA1:2014
---------------------- Page: 2 ----------------------
SIST EN 13765:2011/kFprA1:2014
EUROPEAN STANDARD
FINAL DRAFT
EN 13765:2010
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
June 2014
ICS 23.040.70
English Version
Thermoplastic multi-layer (non-vulcanized) hoses and hose
assemblies for the transfer of hydrocarbons, solvents and
chemicals - Specification
Tuyaux et assemblages flexibles thermoplastique Thermoplastische, mehrlagige (nicht vulkanisierte)
multicouches (non vulcanisés) pour le dépotage Schläuche und Schlauchleitungen für die Förderung von
d'hydrocarbures, solvants et produits chimiques - Kohlenwasserstoffen, Lösungsmitteln und Chemikalien -
Spécifications Spezifikation
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 218.
This draft amendment A1, if approved, will modify the European Standard EN 13765:2010. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13765:2010/FprA1:2014 E
worldwide f
...