|
PREDSTANDARD
september 2005
Podloge za športne dejavnosti – Ugotavljanje odpornosti proti vrtenju
Surfaces for sports areas – Determination of rotational resistance
ICS 97.220.10 Referenčna številka
oSIST prEN 15301:2005(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN 15301
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2005
ICS
English Version
Surfaces for sports areas - Determination of rotational
resistance
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 217.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15301:2005: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
prEN 15301:2005 (E)
Contents Page
Foreword.3
1 Scope .4
2 Method1: Determination of shear strength on site .4
2.1 Principle.4
2.2 Apparatus .4
2.3 Procedure .4
2.4 Number and distribution of readings.4
2.5 Expression of results .4
2.6 Test report .5
3 Method 2: Dynamic and top layer testing of unbound mineral surfaces in the laboratory .6
3.1 Apparatus .6
3.2 Preparing the test specimen.9
3.3 Producing the test specimen.10
3.4 Procedure .10
3.5 Results .11
3.6 Test report .11
2
---------------------- Page: 3 ----------------------
prEN 15301:2005 (E)
Foreword
This document (prEN 15301:2005) has been prepared by Technical Committee CEN/TC 217 “S
...