EN 3762:2022

Aerospace series - Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) - Softened and cold worked - Wire for forged fasteners - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa

EN 3762:2022

Name:EN 3762:2022   Standard name:Aerospace series - Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) - Softened and cold worked - Wire for forged fasteners - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa
Standard number:EN 3762:2022   language:English language
Release Date:20-Dec-2022   technical committee:ASD-STAN - Aerospace
Drafting committee:ASD-STAN/D 4/S 3 - Steels & Heat Resisting Alloys   ICS number:49.025.05 - Ferrous alloys in general

SLOVENSKI STANDARD
01-marec-2023
Aeronavtika - Toplotno odporna zlitina X6NiCrTiMnMoV26-15 (1.4944) - Popuščana
in hladno obdelana - Žice za kovane vezne elemente - D ≤ 15 mm - 1100 MPa ≤ Rm
≤ 1300 MPa
Aerospace series - Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) - Softened and
cold worked - Wire for forged fasteners - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa
Luft- und Raumfahrt - Hochwarmfeste Legierung X6NiCrTiMnMoV26-15 (1.4944) -
Weichgeglüht und kaltverfestigt - Draht zum Stauchen für Verbindungselemente - D ≤ 15
mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa
Série aérospatiale - Alliage résistant à chaud X6NiCrTiMnMoV26-15 (1.4944) - Adouci et
écroui - Fils pour éléments de fixation forgés - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300
MPa
Ta slovenski standard je istoveten z: EN 3762:2022
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3762
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 49.025.05
English Version
Aerospace series - Heat-resisting alloy
X6NiCrTiMnMoV26-15 (1.4944) - Softened and cold
worked - Wire for forged fasteners - D ≤ 15 mm - 1 100
MPa ≤ R ≤ 1 300 MPa
m
Série aérospatiale - Alliage résistant à chaud Luft- und Raumfahrt - Hochwarmfeste Legierung
X6NiCrTiMnMoV26-15 (1.4944) - Adouci et écroui - X6NiCrTiMnMoV26-15 (1.4944) - Weichgeglüht und
Fils pour éléments de fixation forgés - D ≤ 15 mm - 1 kaltverfestigt - Draht zum Stauchen für
Verbindungselemente - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤
100 MPa ≤ Rm ≤ 1 300 MPa
1 300 MPa
This European Standard was approved by CEN on 24 July 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3762:2022 E
worldwide for CEN national Members.

EN 3675:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Acceptance sampling plan . 5
Bibliography . 9

European foreword
This document (EN 3762:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by month year June 2023, and conflicting national
standards shall be withdrawn
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27