|
oSIST prEN 15631:2007
01-junij-2007
Stroji in obrati za pridobivanje in obdelavo naravnega kamna - Varnost - Zahteve
za krožne žage
Machines and plants for mining and tooling of natural stone - Safety - Requirements for
circular block saws
Maschinen und Anlagen zur Gewinnung und Bearbeitung von Naturstein - Sicherheit -
Anforderungen für Blockkreissägen
Machines et installations pour l'extraction et l'usinage des pierres naturelles - Sécurité -
Exigences pour les coupe-blocs a disque
Ta slovenski standard je istoveten z: prEN 15631
ICS:
25.080.60 Strojne žage Sawing machines
73.120 Oprema za predelavo rudnin Equipment for processing of
minerals
oSIST prEN 15631:2007 en;fr;de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN 15631
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2007
ICS 25.080.60; 73.120
English Version
Machines and plants for mining and tooling of natural stone -
Safety - Requirements for circular block saws
Machines et installations pour l'extraction et l'usinage des Maschinen und Anlagen zur Gewinnung und Bearbeitung
pierres naturelles - Sécurité - Exigences pour les coupe- von Naturstein - Sicherheit - Anforderungen für
blocs à disque Blockkreissägen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 151.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15631:2007: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
prEN 15631:2007 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope.4
2 Normative references.5
3 Terms and definitions .6
4 List of significant hazards .8
5 Safety requirements and/or protective measures.9
5.1 General.9
5.2 Mechanical hazards.9
5.3 Electrical hazards.11
5.4 Electromagnetic Radiation.12
5.5 Hydraulic and pneumatic components.12
5.6 Noise reduction.
...