EN 3675:2022

Aerospace series - Sampling plan for acceptance testing of aramid, carbon fibre and textile glass filament yarns

EN 3675:2022

Name:EN 3675:2022   Standard name:Aerospace series - Sampling plan for acceptance testing of aramid, carbon fibre and textile glass filament yarns
Standard number:EN 3675:2022   language:English language
Release Date:20-Dec-2022   technical committee:ASD-STAN - Aerospace
Drafting committee:ASD-STAN/D 4/S 8 - Thermoplastics   ICS number:49.025.60 - Textiles

SLOVENSKI STANDARD
01-marec-2023
Aeronavtika - Načrt vzorčenja za preskušanje sprejemljivosti aramidnih in
ogljikovih vlaken ter tekstilne steklene filamentne preje
Aerospace series - Sampling plan for acceptance testing of aramid, carbon fibre and
textile glass filament yarns
Luft- und Raumfahrt - Prüfplan für die Abnahmeprüfung von Aramid-, Kohlenstoff- und
Textilglasfilamentgarnen
Série aérospatiale - Plan d'échantillonnage pour le contrôle de réception des fils continus
d'aramide, de carbone et de verre textile
Ta slovenski standard je istoveten z: EN 3675:2022
ICS:
49.025.60 Tekstilije Textiles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3675
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 49.025.60
English Version
Aerospace series - Sampling plan for acceptance testing of
aramid, carbon fibre and textile glass filament yarns
Série aérospatiale - Plan d'échantillonnage pour le Luft- und Raumfahrt - Prüfplan für die
contrôle de réception des fils continus d'aramide, de Abnahmeprüfung von Aramid-, Kohlenstoff- und
carbone et de verre textile Textilglasfilamentgarnen
This European Standard was approved by CEN on 24 July 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3675:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Acceptance sampling plan . 4
4.1 Sampling . 4
4.2 Evaluation . 6
4.2.1 Inspection of visually detectable nonconformities . 6
4.2.2 Measurable product characteristics . 6
4.3 Laminate inspection . 6
4.4 Test report . 7
Bibliography . 8

European foreword
This document (EN 3675:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023 and conflicting national standards shall
be withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Türkiye and the United Kingdom.
1 Scope
This document specifies the sampling plan for acceptance testing of aramid, carbon fibre and textile
glass filament yarns in terms of sample size and rejection criteria.
This document serves as a basis for the corresponding technical specification. It covers the inspection
by attributes. The inspection by measurements (variables) will be added in subsequent edition. It is also
planned to extend its scope of application to reinforcing woven fabrics.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27