|
SLOVENSKI STANDARD
01-marec-2023
Aeronavtika - Specifikacija preskusa za preverjanje prepustnosti izolacije
električne opreme
Aerospace series - Test specification for verification of the permeability of electrical
insulation
Luft- und Raumfahrt - Testverfahren zur Überprüfung der elektrischen Isolationsfestigkeit
Série aérospatiale - Spécification d’essai pour la vérification de la perméabilité de
l’isolation électrique
Ta slovenski standard je istoveten z: EN 4703:2022
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 4703
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 49.060
English Version
Aerospace series - Test specification for verification of the
permeability of electrical insulation
Série aérospatiale - Spécification d'essai pour la Luft- und Raumfahrt - Testverfahren zur Überprüfung
vérification de la perméabilité de l'isolation électrique der elektrischen Isolationsfestigkeit
This European Standard was approved by CEN on 22 August 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4703:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Test set-up . 4
4.1 General set-up . 4
4.1.1 General. 4
4.1.2 Test set-up 1: HV-insulation resistance measurement . 4
4.1.3 Test set-up 2: Sheath integrity measurement . 5
4.2 Immersion of receptacle . 6
4.3 Operation of test unit . 7
5 Test procedure . 8
6 Pass/fail criteria . 9
7 Designation . 10
European foreword
This document (EN 4703:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023, and conflicting national standards shall be
withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Republic of North Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
the United Kingdom.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
1 Scope
This document specifies a test that determines the ability of electrical equipment to withstand wet
atmospheres in combination with variable ambient air pressure in particular in an aircraft installation.
The main adverse effects to be anticipated are fluid ingress and related insulation breakdown.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 2678, Environmental tests for aircraft equipment — Insulation resistance and high voltage tests for
electrical equipment
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at
— IEC Electropedia: available at
3.1
LCR meter
type of electronic test equipment used to meas
...