|
oSIST prEN 13212:2009
01-februar-2009
0DWHULDOL]DR]QDþHYDQMHYR]LãþD=DKWHYH]DQRWUDQMRNRQWURORSURL]YRGQMH
Road marking materials - Requirements for factory production control
Straßenmarkierungsmaterialien - Anforderungen an die werkseigene
Produktionskontrolle
Produits de marquage routier - Exigences pour le contrôle de la production en usine
Ta slovenski standard je istoveten z: prEN 13212
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 13212:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13212:2009
---------------------- Page: 2 ----------------------
oSIST prEN 13212:2009
EUROPEAN STANDARD
DRAFT
prEN 13212
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2008
ICS 93.080.20 Will supersede EN 13212:2001
English Version
Road marking materials - Requirements for factory production
control
Produits de marquage routier - Exigences relatives au Straßenmarkierungsmaterialien - Anforderungen an die
contrôle de la production en usine werkseigene Produktionskontrolle
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 226.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13212:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13212:2009
prEN 13212:2008 (E)
Contents
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 General requirements for factory production control (FPC).5
4.1 General.5
4.2 System requirements .6
4.3 Final testing.9
4.3.2.1 Paint (EN 1871).9
4.3.2.2 Thermoplastics (EN 1871).10
4.3.2.3 Cold plastics (EN 1871) .10
4.3.2.4 Drop-on materials and premix glass beads (EN 1423 and EN 1424).10
4.3.2.5 Preformed road markings (EN 1790) .
...