EN 14111:2022

Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of iodine value

EN 14111:2022

Name:EN 14111:2022   Standard name:Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of iodine value
Standard number:EN 14111:2022   language:English language
Release Date:28-Jun-2022   technical committee:CEN/TC 307 - Oilseeds, vegetables and animal fats and oils and their by-products - Methods of sampling and analys
Drafting committee:CEN/TC 307 - Oilseeds, vegetables and animal fats and oils and their by-products - Methods of sampling and analys   ICS number:67.200.10 - Animal and vegetable fats and oils

SLOVENSKI STANDARD
01-september-2022
Nadomešča:
SIST EN 14111:2003
Derivati maščob in olj - Metil estri maščobnih kislin (FAME) - Določevanje jodnega
števila
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of iodine value
Erzeugnisse aus pflanzlichen und tierischen Fetten und Ölen - Fettsäure-Methylester
(FAME) - Bestimmung der Iodzahl
Produits dérivés des corps gras - Esters méthyliques d'acides gras (EMAG) -
Détermination de l'indice d'iode
Ta slovenski standard je istoveten z: EN 14111:2022
ICS:
67.200.10 Rastlinske in živalske Animal and vegetable fats
maščobe in olja and oils
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 14111
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2022
EUROPÄISCHE NORM
ICS 67.200.10 Supersedes EN 14111:2003
English Version
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) -
Determination of iodine value
Produits dérivés des corps gras - Esters méthyliques Erzeugnisse aus pflanzlichen und tierischen Fetten und
d'acides gras (EMAG) - Détermination de l'indice d'iode Ölen - Fettsäure-Methylester (FAME) - Bestimmung
der Iodzahl
This European Standard was approved by CEN on 23 April 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14111:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Reagents . 6
6 Apparatus . 6
7 Sampling . 6
8 Preparation . 6
9 Procedure . 6
10 Calculation . 7
11 Expression of results . 7
12 Precision . 7
13 Test report . 8
Annex A (informative) Result of an interlaboratory trial . 9
Bibliography . 10

European foreword
This document (EN 14111:2022) has been prepared by Technical Committee CEN/TC 307 “Oilseeds,
vegetable and animal fats and oils and their by-products - Methods of sampling and analysis”, the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2022, and conflicting national standards shall
be withdrawn at the latest by December 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14111:2003.
In comparison with the previous edition, the following technical modifications have been made:
— glass weighing scoops should no longer be inserted into the flask.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
Introduction
This document is based on EN ISO 3961 [1] which was specifically adapted for the determination of
iodine value of Fatty Acid Methyl Esters (FAME).
1 Scope
This document specifies a titrimetric method for the determination of iodine value in Fatty Acid Methyl
Esters, hereinafter referred as FAME.
The precision statement of this test method was determined in a Round Robin exercise with iodine values
in the range 111 g iodine/100 g to 129 g iodine/100 g.
The test method is also applicable for lower iodine values; however, the precision statement is not
established for iodine values below 111 g iodine/100 g.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This
document does not purport to address all of the safety problems as
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27