|
SIST EN 14328:2005/oprA1:2009
01-november-2009
9DURYDOQDREOHND5RNDYLFHLQãþLWQLNLURN]DYDURYDQMHSUHGXUH]QLQDPLJQDQLK
QRåHY=DKWHYHLQSUHVNXVQHPHWRGH
Protective clothing - Gloves and armguards protecting against cuts by powered knives -
Requirements and test methods
Schutzkleidung - Handschuhe und Armschützer zum Schutz gegen Schnittverletzungen
durch angetriebene Messer - Anforderungen und Prüfverfahren
Vêtements de protection - Gants et protège-bras protégeant contre les coupures par des
couteaux électriques - Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 14328:2005/prA1
ICS:
13.340.40 Varovanje dlani in rok Hand and arm protection
SIST EN 14328:2005/oprA1:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 14328:2005/oprA1:2009
---------------------- Page: 2 ----------------------
SIST EN 14328:2005/oprA1:2009
EUROPEAN STANDARD
DRAFT
EN 14328:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
July 2009
ICS 13.340.40
English Version
Protective clothing - Gloves and armguards protecting against
cuts by powered knives - Requirements and test methods
Vêtements de protection - Gants et protège-bras Schutzkleidung - Handschuhe und Armschützer zum
protégeant contre les coupures par des couteaux Schutz gegen Schnittverletzungen durch angetriebene
électriques - Exigences et méthodes d'essai Messer - Anforderungen und Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 162.
This draft amendment A1, if approved, will modify the European Standard EN 14328:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Gre
...