|
oSIST prEN 13616:2010
01-julij-2010
1DSUDYH]DSUHSUHþLWHYSUHSROQLWYH]DVWDELOQHUH]HUYRDUMH]DWHNRþDJRULYD
Overfill prevention devices for static tanks for liquid petroleum fuels
Überfüllsicherungen für ortsfeste Tanks für flüssige Brenn- und Kraftstoffe
Dispositifs limiteurs de remplissage pour réservoirs statiques pour carburants pétroliers
liquides
Ta slovenski standard je istoveten z: prEN 13616
ICS:
23.020.10 1HSUHPLþQHSRVRGHLQ Stationary containers and
UH]HUYRDUML tanks
75.200 2SUHPD]DVNODGLãþHQMH Petroleum products and
QDIWHQDIWQLKSURL]YRGRYLQ natural gas handling
]HPHOMVNHJDSOLQD equipment
oSIST prEN 13616:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13616:2010
---------------------- Page: 2 ----------------------
oSIST prEN 13616:2010
EUROPEAN STANDARD
DRAFT
prEN 13616
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2010
ICS 23.020.10; 75.200 Will supersede EN 13616:2004
English Version
Overfill prevention devices for static tanks for liquid petroleum
fuels
Dispositifs limiteurs de remplissage pour réservoirs Überfüllsicherungen für ortsfeste Tanks für flüssige Brenn-
statiques pour carburants pétroliers liquides und Kraftstoffe
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 393.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13616:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13616:2010
prEN 13616:2010 (E)
Contents Page
Foreword .4
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms, definitions and abbreviated terms .6
4 General requirements .7
4.1 Functional criteria .7
4.2 Construction .8
4.3 Avoidance or reduction of ignition sources .8
5 Overfill prevention device Type A .8
5.1 Classification .8
5.2 Flow rate .
...