prEN ISO/IEC 17021-2

Conformity assessment - Requirements for bodies providing audit and certification of management systems and requirements for third-party certification auditing of management systems - Part 2: Requirements for third party certification auditing of management systems (ISO/IEC/DIS 17021-2:2009)

prEN ISO/IEC 17021-2

Name:prEN ISO/IEC 17021-2   Standard name:Conformity assessment - Requirements for bodies providing audit and certification of management systems and requirements for third-party certification auditing of management systems - Part 2: Requirements for third party certification auditing of management systems (ISO/IEC/DIS 17021-2:2009)
Standard number:prEN ISO/IEC 17021-2   language:English language
Release Date:13-Jun-2011   technical committee:CEN/CLC/TC 1 - Criteria for conformity assessment bodies
Drafting committee:CEN/CLC/TC 1 - Criteria for conformity assessment bodies   ICS number:03.120.20 - Product and company certification. Conformity assessment
SLOVENSKI STANDARD
oSIST prEN ISO/IEC 17021-2:2009
01-november-2009
Ugotavljanje skladnosti - Zahteve za organe, ki presojajo in certificirajo sisteme
vodenja, in zahteve za tretje stranke, ki presojajo certificiranje sistemov vodenja -
2. del: Zahteve za tretje stranke, ki presojajo certificiranje sistemov vodenja
(ISO/IEC/DIS 17021-2:2009)
Conformity assessment - Requirements for bodies providing audit and certification of
management systems and requirements for third-party certification auditing of
management systems - Part 2: Requirements for third party certification auditing of
management systems (ISO/IEC/DIS 17021-2:2009)
Konformitätsbewertung - Teil 2: Anforderungen an Drittparteien - Zertifizierungsaudits
von Managementsystemen (ISO/IEC/DIS 17021-2:2009)
Évaluation de la conformité - Exigences pour les organismes procédant à l'audit et à la
certification des systèmes de management et exigences pour l'audit de certification par
une tierce partie de systèmes de management - Partie 2: Exigences pour l'audit de
certification par une tierce partie de systèmes de management (ISO/IEC/DIS 17021-
2:2009)
Ta slovenski standard je istoveten z: prEN ISO/IEC 17021-2
ICS:
03.120.20 Certificiranje proizvodov in Product and company
podjetij. Ugotavljanje certification. Conformity
skladnosti assessment
oSIST prEN ISO/IEC 17021-2:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO/IEC 17021-2:2009

---------------------- Page: 2 ----------------------
oSIST prEN ISO/IEC 17021-2:2009



EUROPEAN STANDARD
DRAFT
prEN ISO/IEC 17021-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2009
ICS 03.120.20

English version
Conformity assessment - Requirements for bodies providing
audit and certification of management systems and
requirements for third-party certification auditing of management
systems - Part 2: Requirements for third party certification
auditing of management systems (ISO/IEC/DIS 17021-2:2009)
Évaluation de la conformité - Exigences pour les Konformitätsbewertung - Teil 2: Anforderungen an
organismes procédant à l'audit et à la certification des Drittparteien - Zertifizierungsaudits von
systèmes de management et exigences pour l'audit de Managementsystemen (ISO/IEC/DIS 17021-2:2009)
certification par une tierce partie de systèmes de
management - Partie 2: Exigences pour l'audit de
certification par une tierce partie de systèmes de
management (ISO/IEC/DIS 17021-2:2009)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/CLC/TC 1.

If this draft becomes a European Standard, CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal
Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN and CENELEC in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CEN and or CENELEC member into its own language and notified to the
CEN Management Centre has the same status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees, respectively, of Austria,
Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



CEN Management Centre: CENELEC Central Secretariat:
Avenue Marnix 17, B-1000 Brussels Avenue Marnix 17, B-1000 Brussels
© 2009 CEN/CENELEC All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO/IEC 17021-2:2009 E
worldwide for CEN national Members and for CENELEC
Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO/IEC 17021-2:2009
prEN ISO/IEC 17021-2:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO/IEC 17021-2:2009
prEN ISO/IEC 17021-2:2009 (E)
Foreword
This document (prEN ISO/IEC 17021-2:2009) has been prepared by Technical Committee ISO/CASCO
"Committee on conformity assessment" in
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27