|
oSIST prEN 15080-13:2009
01-september-2009
Razširjena uporaba rezultatov preskusov požarne odpornosti - 13. del: Nosilni
stebri
Extended application of results from fire resistance tests - Part 13: Load bearing columns
Erweiterter Anwendungsbereich der Ergebnisse aus Feuerwiderstandsprüfungen - Teil
13: Tragende Stützen
Application étendue des résultats des essais de résistance au feu - Partie 13 : Poteaux
porteurs
Ta slovenski standard je istoveten z: prEN 15080-13
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
oSIST prEN 15080-13:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15080-13:2009
---------------------- Page: 2 ----------------------
oSIST prEN 15080-13:2009
EUROPEAN STANDARD
DRAFT
prEN 15080-13
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2009
ICS
English Version
Extended application of results from fire resistance tests - Part
13: Load bearing columns
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 127.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15080-13:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15080-13:2009
prEN 15080-13:2009 (E)
Foreword
This document (prEN 15080-13:2009) has been prepared by Technical Committee CEN/TC 127 “Fire
safety in buildings”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and
the European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annex ZA, which is an integral part of this
document.
This document is based on the draft for beams (prEN 15080-8).
Sections 1 to 6 are almost identical to the final version of prEN 15080-8.
Annex A, GUIDELINES FOR MAKING ASSESSMENTS has been taken directly from prEN 15080-8
with ‘beam’ changed to ‘column’ and some of the examples changed
Some of the figures contain text and do not yet conform to CEN rules.
The document needs:
An example of EXAP on a steel column
An example of EXAP on a concrete column
An example of EXAP on a timber column – Is this practical? Is this required?
2
---------------------- Page: 4 ----------------------
oSIST prEN 15080-13:2009
prEN 15080-13:2009 (E)
Contents Page
Foreword . 2
1 Scope. 4
2 Normative references . 4
3 Terms and Definitions . 5
4 Basis and methodology of establishing the extended application . 6
4.1 General . 6
4.2 Basic principles .
...