|
oSIST prEN 16031:2010
01-marec-2010
1DVWDYOMLYHDOXPLQLMDVWHWHOHVNRSVNHSRGSRUH6SHFLILNDFLMHL]GHONDREOLNRYDQMHLQ
RFHQD]L]UDþXQRPLQSUHVNXVL
Adjustable telescopic aluminium props - Product specifications, design and assessment
by calculation and tests
Baustützen aus Aluminium mit Ausziehvorrichtung - Produktfestlegungen, Bemessung
und Nachweis durch Berechnung und Versuche
Etais télescopiques réglables en aluminium - Spécifications du produit, conception et
évaluation par calculs et essais
Ta slovenski standard je istoveten z: prEN 16031
ICS:
91.220 Gradbena oprema Construction equipment
oSIST prEN 16031:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16031:2010
---------------------- Page: 2 ----------------------
oSIST prEN 16031:2010
EUROPEAN STANDARD
DRAFT
prEN 16031
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2009
ICS
English Version
Adjustable telescopic aluminium props - Product specifications,
design and assessment by calculation and tests
Etais télescopiques réglables en aluminium - Spécifications Baustützen aus Aluminium mit Ausziehvorrichtung -
du produit, conception et évaluation par calculs et essais Produktfestlegungen, Bemessung und Nachweis durch
Berechnung und Versuche
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 53.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16031:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16031:2010
prEN 16031:2009 (E)
Contents Page
Foreword .4
Introduction .4
1 Scope .4
2 Normative references .4
3 Definitions .7
3.1 adjustable telescopic aluminium prop .7
3.2 endplate .7
3.3 collar nut .7
3.4 inner tube .7
3.5 outer tube .7
3.6 length at maximum extension .7
3.
...