|
oSIST prEN 13381-4:2009
01-februar-2009
3UHVNXVQHPHWRGH]DXJRWDYOMDQMHSULVSHYNDNSRåDUQLRGSRUQRVWLNRQVWUXNFLMVNLK
HOHPHQWRYGHO =DãþLWDMHNOHQLKHOHPHQWRY
Test methods for determining the contribution to the fire resistance of structural members
- Part 4: Applied passive protection products to steel members
Prüfverfahren zur Bestimmung des Beitrages zum Feuerwiderstand von tragenden
Bauteilen - Teil 4: Passive Brandschutzmaterialien für Stahlbauteile
Méthode d'essai pour déterminer la contribution à la résistance au feu des éléments de
construction - Partie 4 : Revêtements non réactifs
Ta slovenski standard je istoveten z: prEN 13381-4
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.080.10 Kovinske konstrukcije Metal structures
oSIST prEN 13381-4:2009 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13381-4:2009
---------------------- Page: 2 ----------------------
oSIST prEN 13381-4:2009
EUROPEAN STANDARD
DRAFT
prEN 13381-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2008
ICS 91.080.10; 13.220.50 Will supersede ENV 13381-4:2002
English Version
Test methods for determining the contribution to the fire
resistance of structural members - Part 4: Applied passive
protection products to steel members
Méthode d'essai pour déterminer la contribution à la Prüfverfahren zur Bestimmung des Beitrages zum
résistance au feu des éléments de construction - Partie 4 : Feuerwiderstand von tragenden Bauteilen - Teil 4: Passive
Revêtements non réactifs Brandschutzmaterialien für Stahlbauteile
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 127.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13381-4:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13381-4:2009
prEN 13381-4:2008 (E)
Contents Page
Foreword. 5
1 Scope. 6
2 Normative references . 7
3 Terms and definitions, symbols and units. 7
3.1 Terms and definitions. 7
3.2 Symbols and units . 9
4 Test equipment. 11
4.1 General. 11
4.2 Furnace . 11
4.3 Loading equipment.
...