|
oSIST prEN 1338:2010
01-oktober-2010
Betonski tlakovci - Zahteve in preskusne metode
Concrete paving blocks - Requirements and test methods
Pflastersteine aus Beton - Anforderungen und Prüfverfahren
Pavés en béton - Prescriptions et méthodes d'essai
Ta slovenski standard je istoveten z: prEN 1338
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 1338:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1338:2010
---------------------- Page: 2 ----------------------
oSIST prEN 1338:2010
EUROPEAN STANDARD
DRAFT
prEN 1338
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2010
ICS 93.080.20 Will supersede EN 1338:2003
English Version
Concrete paving blocks - Requirements and test methods
Pavés en béton - Prescriptions et méthodes d'essai Pflastersteine aus Beton - Anforderungen und
Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 178.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1338:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1338:2010
prEN 1338:2010 (E)
Contents Page
Foreword . 3
1 Scope . 3
2 Normative references . 3
3 Terms and definitions . 4
4 Requirements for materials . 6
5 Requirements for products. 7
6 Evaluation of conformity criteria . 12
7 Marking. 17
8 Test report . 17
Annex A (informative) Inspection schemes . 19
Annex B (normative) Procedure for acceptance testing of a consignment at delivery . 23
Annex C (normative) Measurement of the dimensions of a single block . 25
Annex D (normative) Determination of freeze/thaw resistance with de-icing salt . 29
Annex E (normative) Determination of total water absorption. 35
Annex F (normative) Measurement of str
...