|
oSIST prEN 13108-9:2010
01-junij-2010
Bitumenske zmesi - Specifikacije materialov - 9. del: Zelo tanke plasti
bitumenskega betona (UTLAC)
Bituminous mixtures - Material specifications - Part 9: Bituminous mixture for Ultra-thin
layer Asphalt Concrete (UTLAC)
Asphaltmischgut - Mischgutanforderungen - Teil 9: Asphaltmischgut für extrem dünne
Asphaltbetonschichten (UTLAC)
Mélanges bitumineux - Spécifications des matériaux - Partie 9: Béton bitumineux ultra-
mince (BBUM)
Ta slovenski standard je istoveten z: prEN 13108-9
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 13108-9:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13108-9:2010
---------------------- Page: 2 ----------------------
oSIST prEN 13108-9:2010
EUROPEAN STANDARD
DRAFT
prEN 13108-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2010
ICS 93.080.20
English Version
Bituminous mixtures - Material specifications - Part 9:
Bituminous mixture for Ultra-thin layer Asphalt Concrete
(UTLAC)
Mélanges bitumineux - Spécifications des matériaux - Asphaltmischgut - Mischgutanforderungen - Teil 9:
Partie 9: Béton bitumineux ultra-mince (BBUM) Asphaltmischgut für extrem dünne Asphaltbetonschichten
(UTLAC)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 227.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13108-9:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13108-9:2010
prEN 13108-9:2010 (E)
Contents Page
Foreword .4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms, definitions, symbols and abbreviations .7
3.1 Terms and definitions .7
3.2 Symbols and abbreviations .8
4 Requirements for constituent materials .8
4.1 General .8
4.2 Binder .8
4.2.1 General .8
4.2.2 Selection of binder.
...