|
oSIST prEN 845-3:2010
01-marec-2010
Specifikacija za dodatne komponente zidovja - 3. del: Jeklene mreže za armiranje
naležnih reg
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of
steel meshwork
Festlegungen für Ergänzungsbauteile für Mauerwerk - Teil 3: Lagerfugenbewehrung aus
Stahl
Ta slovenski standard je istoveten z: prEN 845-3
ICS:
91.060.10 Stene. Predelne stene. Walls. Partitions. Facades
Fasade
91.080.30 Zidane konstrukcije Masonry
oSIST prEN 845-3:2010 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 845-3:2010
---------------------- Page: 2 ----------------------
oSIST prEN 845-3:2010
EUROPEAN STANDARD
DRAFT
prEN 845-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2010
ICS 91.080.30 Will supersede EN 845-3:2003+A1:2008
English Version
Specification for ancillary components for masonry - Part 3: Bed
joint reinforcement of steel meshwork
Festlegungen für Ergänzungsbauteile für Mauerwerk - Teil
3: Lagerfugenbewehrung aus Stahl
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 125.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 845-3:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 845-3:2010
prEN 845-3:2010 (E)
Contents Page
Foreword . 3
1 Scope. 4
2 Normative reference . 4
3 Terms, definitions and symbols . 5
3.1 Terms and definitions . 5
3.2 Symbols . 6
4 Materials and types of products . 7
4.1 Materials . 7
4.2 Types of products . 9
5 Requirements . 10
5.1 General . 10
5.2 Product applications and types . 11
5.3 Dimensions and limit deviations . 11
5.4 Mechanical strength . 13
5.5 Bond strength and lap length .
...