|
oSIST prEN 16034:2010
01-marec-2010
Vrata, okna, vrata v industrijske in javne prostore, garažna vrata in okna - Standard
za proizvod, zahtevane lastnosti - Požarna odpornost in/ali dimotesnosti
Pedestrian doorsets, industrial, commercial, garage doors and windows - Product
standard, performance characteristics - Fire resistance and/or smoke control
characteristics
Fenster, Türen und Tore - Produktnorm, Leistungseigenschaften - Feuer und/oder
Rauchschutzeigenschaften
Blocs portes pour piétons, portes et fenêtres industrielles, commerciales et de garage -
Norme de produit, caractéristiques de performance - Caractéristiques de résistance au
feu et/ou d'étanchéité aux fumées
Ta slovenski standard je istoveten z: prEN 16034
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.50 Vrata in okna Doors and windows
oSIST prEN 16034:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16034:2010
---------------------- Page: 2 ----------------------
oSIST prEN 16034:2010
EUROPEAN STANDARD
DRAFT
prEN 16034
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2009
ICS
English Version
Pedestrian doorsets, industrial, commercial, garage doors and
windows - Product standard, performance characteristics - Fire
resistance and/or smoke control characteristics
Blocs portes pour piétons, portes et fenêtres industrielles, Fenster, Türen und Tore - Produktnorm,
commerciales et de garage - Norme de produit,
Leistungseigenschaften - Feuer und/oder
caractéristiques de performance - Caractéristiques de Rauchschutzeigenschaften
résistance au feu et/ou d'étanchéité aux fumées
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16034:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16034:2010
prEN 16034:2009 (E)
Contents
Page
Foreword . 3
Introduction . 5
1 Scope . 6
1.1 General . 6
1.2 Exclusions . 6
2 Normative references . 7
3 Terms and definitions . 7
4 Performance characteristics and special requirements . 8
4.1 General .
...