|
oSIST prEN 13142:2010
01-december-2010
3UH]UDþHYDQMHVWDYE.RPSRQHQWHL]GHONL]DSUH]UDþHYDQMHVWDQRYDQM=DKWHYDQH
LQQH]DKWHYDQHNDUDNWHULVWLþQHODVWQRVWL
Ventilation for buildings - Components/products for residential ventilation - Required and
optional performance characteristics
Lüftung von Gebäuden - Bauteile/Produkte für die Lüftung von Wohnungen - Geforderte
und frei wählbare Leistungskenngrößen
Ventilation des bâtiments - Composants/produits pour la ventilation des logements -
Caractéristiques de performances exigées et optionnelles
Ta slovenski standard je istoveten z: prEN 13142
ICS:
91.140.30 3UH]UDþHYDOQLLQNOLPDWVNL Ventilation and air-
VLVWHPL conditioning
oSIST prEN 13142:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13142:2010
---------------------- Page: 2 ----------------------
oSIST prEN 13142:2010
EUROPEAN STANDARD
DRAFT
prEN 13142
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2010
ICS 91.140.30 Will supersede EN 13142:2004
English Version
Ventilation for buildings - Components/products for residential
ventilation - Required and optional performance characteristics
Ventilation des bâtiments - Composants/produits pour la Lüftung von Gebäuden - Bauteile/Produkte für die Lüftung
ventilation des logements - Caractéristiques de von Wohnungen - Geforderte und frei wählbare
performances exigées et optionnelles Leistungskenngrößen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 156.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13142:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13142:2010
prEN 13142:2010 (E)
Contents Page
Foreword .4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 Systematic of balanced ventilation units .8
5 Performance characteristics for residential ventilation components/products .8
5.1 General .8
5.2 Externally mounted air transfer devices .8
5.2.1 Aerodynamic characteristics .8
5.2.2 Equivalent area .
...