|
oSIST prEN 1096-5:2011
01-september-2011
6WHNORYJUDGEHQLãWYX6WHNOR]QDQRVLGHO0HWRGHSUHVNXãDQMDLQNODVLILNDFLMD
]DVDPRþLVWLOQHODVWQRVWLSRYUãLQHVWHNOD]QDQRVRP
Glass in building - Coated glass - Part 5: Test method and classification for the self-
cleaning performances of coated glass surfaces
Glas im Bauwesen - Beschichtetes Glas - Teil 5: Prüfverfahren und Klasseneinteilung für
das Selbstreinigungsverhalten von beschichteten Glasoberflächen
Verre dans la construction - Verre à couche - Partie 5: Méthode d'essai et classification
des performances autonettoyantes des surfaces de verre à couche
Ta slovenski standard je istoveten z: prEN 1096-5
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
oSIST prEN 1096-5:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1096-5:2011
---------------------- Page: 2 ----------------------
oSIST prEN 1096-5:2011
EUROPEAN STANDARD
DRAFT
prEN 1096-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2011
ICS 81.040.20
English Version
Glass in building - Coated glass - Part 5: Test method and
classification for the self-cleaning performances of coated glass
surfaces
Verre dans la construction - Verre à couche - Partie 5: Glas im Bauwesen - Beschichtetes Glas - Teil 5:
Méthode d'essai et classification des performances Prüfverfahren und Klasseneinteilung für das
autonettoyantes des surfaces de verre à couche Selbstreinigungsverhalten von beschichteten
Glasoberflächen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 129.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1096-5:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1096-5:2011
prEN 1096-5:2011 (E)
Contents Page
Foreword .4
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle of the test.5
5 Instrumentation .6
5.1 UVA-Illumination chamber .6
5.2 Sample support .6
5.3 Spraying nozzle .6
5.4 Dirt mixture pressure tank .
...