|
oSIST prEN 267:2012
01-maj-2012
9HQWLODWRUVNLJRULOQLNL]DWHNRþDJRULYD
Forced draught burners for liquid fuels
Gebläsebrenner für flüssige Brennstoffe
Brûleurs à air soufflé pour combustibles liquides
Ta slovenski standard je istoveten z: prEN 267 rev
ICS:
27.060.10 *RULOQLNLQDWHNRþHLQWUGR Liquid and solid fuel burners
JRULYR
oSIST prEN 267:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 267:2012
---------------------- Page: 2 ----------------------
oSIST prEN 267:2012
EUROPEAN STANDARD
DRAFT
prEN 267 rev
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2012
ICS 27.060.10 Will supersede EN 267:2009+A1:2011
English Version
Forced draught burners for liquid fuels
Brûleurs à air soufflé pour combustibles liquides Gebläsebrenner für flüssige Brennstoffe
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 47.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 267 rev:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 267:2012
prEN 267:2012 (E)
Contents Page
Foreword .5
Introduction .6
1 Scope .7
2 Normative references .7
3 Terms and definitions . 11
3.1 General definitions . 11
3.2 Fuel mass flow rate and performance . 11
3.3 Combustion chamber, burner head and test rig . 12
3.4 Composition of the gaseous combustion products . 13
3.5 Adjusting, control and safety devices . 14
3.6 Sequencing . 15
3.7 Diagrams . 17
4 Classification, constructional and operational requirements – safety requirements and/or
protective measures . 17
4.1 Types of atomisation .
...