|
oSIST prEN 958:2012
01-december-2012
Gorniška oprema - Sistemi za absorpcijo energije pri zahtevnem varovanem
planinstvu (via ferrata) - Varnostne zahteve in preskusne metode
Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata)
climbing - Safety requirements and test methods
Bergsteigerausrüstung - Fangstoßdämpfer für die Verwendung auf Klettersteigen -
Sicherheitstechnische Anforderungen und Prüfverfahren
Equipement d'alpinisme et d'escalade - Absorbeur d'énergie utilisés en via ferrata -
Exigences de sécurité et méthodes d'essai
Ta slovenski standard je istoveten z: prEN 958
ICS:
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
oSIST prEN 958:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 958:2012
---------------------- Page: 2 ----------------------
oSIST prEN 958:2012
EUROPEAN STANDARD
DRAFT
prEN 958
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2012
ICS 97.220.40 Will supersede EN 958:2006+A1:2010
English Version
Mountaineering equipment - Energy absorbing systems for use
in klettersteig (via ferrata) climbing - Safety requirements and
test methods
Equipement d'alpinisme et d'escalade - Absorbeur Bergsteigerausrüstung - Fangstoßdämpfer für die
d'énergie utilisés en via ferrata - Exigences de sécurité et Verwendung auf Klettersteigen - Sicherheitstechnische
méthodes d'essai Anforderungen und Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 136.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 958:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 958:2012
prEN 958:2012 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Safety requirements .5
4.1 Design .5
4.2 Operation of the energy absorbing system .6
4.3 Strength of the energy absorbing system .6
5 Test methods .
...