|
oSIST prEN 16477-1:2012
01-oktober-2012
Steklo v gradbeništvu - Poslikano steklo za interno uporabo - 1. del: Zahteve
Glass in building - Painted glass for internal use - Part 1: Requirements
Glas im Bauwesen - Farbiges Glas für den Innenbereich - Teil 1: Prüfungen und
Anforderungen
Verre dans la construction - Verre laqué destiné à un usage à l’intérieur - Partie 1: Essais
et exigences
Ta slovenski standard je istoveten z: prEN 16477-1
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
oSIST prEN 16477-1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16477-1:2012
---------------------- Page: 2 ----------------------
oSIST prEN 16477-1:2012
EUROPEAN STANDARD
DRAFT
prEN 16477-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2012
ICS 81.040.20
English Version
Glass in building - Painted glass for internal use - Part 1:
Requirements
Verre dans la construction - Verre laqué destiné à un usage Glas im Bauwesen - Farbiges Glas für den Innenbereich -
à l'intérieur - Partie 1: Essais et exigences Teil 1: Prüfungen und Anforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 129.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16477-1:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16477-1:2012
prEN 16477-1:2012 (E)
Contents Page
Foreword .4
Introduction .4
1 Scope .4
2 Normative references .4
3 Terms and definitions .5
4 Materials .6
4.1 Glass products .6
4.2 Paint coating(s) .6
5 Dimensional requirements .6
5.1 Thickness .6
5.2 Length, width and squareness .6
6 Quality requirements .
...