prEN ISO 11611 rev

Protective clothing for use in welding and allied processes (ISO/DIS 11611:2013)

prEN ISO 11611 rev

Name:prEN ISO 11611 rev   Standard name:Protective clothing for use in welding and allied processes (ISO/DIS 11611:2013)
Standard number:prEN ISO 11611 rev   language:English language
Release Date:29-Jun-2014   technical committee:CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
Drafting committee:CEN/TC 162/WG 2 - Resistance to heat and fire of protective clothing   ICS number:13.340.10 - Protective clothing
SLOVENSKI STANDARD
oSIST prEN ISO 11611:2011
01-junij-2011
Varovalna obleka za uporabo pri varjenju in sorodnih postopkih (ISO/DIS
11611:2011)
Protective clothing for use in welding and allied processes (ISO/DIS 11611:2011)
Schutzkleidung für Schweißen und verwandte Verfahren (ISO/DIS 11611:2011)
Vêtements de protection utilisés pendant le soudage et les techniques connexes
(ISO/DIS 11611:2011)
Ta slovenski standard je istoveten z: prEN ISO 11611
ICS:
13.340.10 Varovalna obleka Protective clothing
25.160.01 Varjenje, trdo in mehko Welding, brazing and
spajkanje na splošno soldering in general
oSIST prEN ISO 11611:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11611:2011

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11611:2011


EUROPEAN STANDARD
DRAFT
prEN ISO 11611
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2011
ICS 13.340.10; 25.160.01 Will supersede EN ISO 11611:2007
English Version
Protective clothing for use in welding and allied processes
(ISO/DIS 11611:2011)
Vêtements de protection utilisés pendant le soudage et les Schutzkleidung für Schweißen und verwandte Verfahren
techniques connexes (ISO/DIS 11611:2011) (ISO/DIS 11611:2011)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 162.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 11611:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11611:2011
prEN ISO 11611:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 11611:2011
prEN ISO 11611:2011 (E)
Foreword
This document (prEN ISO 11611:2011) has been prepared by Technical Committee CEN/TC 162 “Protective
clothing including hand and arm protection and lifejackets” the secretariat of which is held by DIN, in
collaboration with Technical Committee ISO/TC 94 "Personal safety -- Protective clothing and equipment".
This document is currently submitted to the parallel Enquiry.
This document will supersede EN ISO 11611:2007.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 11611:2011

---------------------- Page: 6 ----------------------
oSIST prEN ISO 11611:2011

DRAFT INTERNATIONAL STANDARD ISO/DIS 11611
ISO/TC 94/SC 13 Secretariat: SNV
Voting begins on Voting terminates on

2011-03-24 2011-08-24
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION  •  МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ  •  ORGANISATION INTERNATIONALE DE NORMALISATION

Protective clothing for use in welding and allied processes
Vêtements de protection utilisés pendant le soudage et les techniques connexes
[Revision of first edition (ISO 11611:2007)]
ICS 13.340.10; 25.160.01


ISO/CEN PARALLEL PROCESSING
This draft has been developed within the European Committee for Standardization (CEN), and
processed under the CEN-lead mode of collaboration
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27