|
oSIST prEN 16383:2012
01-april-2012
7RSORWQRL]RODFLMVNLSURL]YRGL]DXSRUDERYJUDGEHQLãWYX8JRWDYOMDQMHREQDãDQMD
KLJURWHUPLþQLK]XQDQMLKVHVWDYOMHQLKWRSORWQRL]RODFLMVNLKVLVWHPRY]RPHWL (7,&6
Thermal insulating products for building applications - Determination of the hygrothermal
behaviour of external thermal insulation composite systems with renders (ETICS)
Wärmedämmstoffe für das Bauwesen - Bestimmung des hygrothermischen Verhaltens
von außenseitigen Wärmedämm-Verbundsystemen mit Putzen (WDVS)
Produits isolants thermiques pour le bâtiment - Détermination du comportement
hygrothermique des systèmes composites d’isolation thermique par l’extérieur avec
enduits (ETICS)
Ta slovenski standard je istoveten z: prEN 16383
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
oSIST prEN 16383:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16383:2012
---------------------- Page: 2 ----------------------
oSIST prEN 16383:2012
EUROPEAN STANDARD
DRAFT
prEN 16383
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2012
ICS 91.100.60
English Version
Thermal insulating products for building applications -
Determination of the hygrothermal behaviour of external thermal
insulation composite systems with renders (ETICS)
Produits isolants thermiques pour le bâtiment - Wärmedämmstoffe für das Bauwesen - Bestimmung des
Détermination du comportement hygrothermique des
hygrothermischen Verhaltens von außenseitigen
systèmes composites d'isolation thermique par l'extérieur Wärmedämm-Verbundsystemen mit Putzen (WDVS)
avec enduits (ETICS)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 88.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16383:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16383:2012
prEN 16383:2012 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle .5
5 Testing devices .5
6 Test wall .6
6.1 Preparation of the test wall .6
6.2 Conditioning of the test wall .
...