|
oSIST prEN 1709:2013
01-junij-2013
9DUQRVWQH]DKWHYH]DåLþQLãNHQDSUDYH]DSUHYR]RVHE3UHY]HPQLSUHJOHG
Y]GUåHYDQMHSUHJOHGLLQNRQWUROHREUDWRYDQMD
Safety requirements for cableway installations designed to carry persons -
Precommissioning inspection, maintenance, operational inspection and checks
Sicherheitsanforderungen für Seilbahnen für den Personenverkehr - Erprobung,
Instandhaltung, Betriebskontrollen
Prescriptions de sécurité pour les installations à câbles transportant des personnes -
Examen probatoire, maintenance, contrôles en exploitation
Ta slovenski standard je istoveten z: prEN 1709
ICS:
45.100 2SUHPD]DåLþQLFH Cableway equipment
oSIST prEN 1709:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1709:2013
---------------------- Page: 2 ----------------------
oSIST prEN 1709:2013
EUROPEAN STANDARD
DRAFT
prEN 1709
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2013
ICS 45.100 Will supersede EN 1709:2004
English Version
Safety requirements for cableway installations designed to carry
persons - Precommissioning inspection, maintenance,
operational inspection and checks
Prescriptions de sécurité pour les installations à câbles Sicherheitsanforderungen für Seilbahnen für den
transportant des personnes - Examen probatoire, Personenverkehr - Erprobung, Instandhaltung,
maintenance, contrôles en exploitation Betriebskontrollen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 242.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1709:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1709:2013
prEN 1709:2013 (E)
Contents Page
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 General requirements .8
4.1 Application of this Standard .8
4.2 Safety principles .8
4.2.1 General .8
4.2.2 Hazard scenarios .8
4.2.3 Safety measures .8
5 Precommissioning inspection .9
5.1 General .
...