|
oSIST prEN 1459-1:2013
01-junij-2013
Vozila za talni transport - Terenska vozila - Varnostne zahteve in preverjanje - 1.
del: Vozila z mehanizmom za dviganje s spremenljivim dosegom
Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach
trucks
Geländegängige Flurförderzeuge - Sicherheitstechnische Anforderungen und
Verifizierung - Teil 1: Stapler mit veränderlicher Reichweite
Chariots tout-terrain - Exigences de sécurité et vérification - Partie 1: Chariots à portée
variable
Ta slovenski standard je istoveten z: prEN 1459-1
ICS:
53.060 Industrijski tovornjaki Industrial trucks
oSIST prEN 1459-1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1459-1:2013
---------------------- Page: 2 ----------------------
oSIST prEN 1459-1:2013
EUROPEAN STANDARD
DRAFT
prEN 1459-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2013
ICS 53.060 Will supersede EN 1459:1998+A3:2012
English Version
Rough-terrain trucks - Safety requirements and verification - Part
1: Variable-reach trucks
Chariots tout-terrain - Exigences de sécurité et vérification - Geländegängige Flurförderzeuge - Sicherheitstechnische
Partie 1: Chariots à portée variable Anforderungen und Verifizierung - Teil 1: Stapler mit
veränderlicher Reichweite
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 150.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1459-1:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1459-1:2013
prEN 1456-1:2013 (E)
Contents Page
Foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 9
4 List of significant hazards . 13
5 Requirements . 13
5.1 General . 13
5.2 Starting/Moving . 13
5.3 Brakes . 14
5.4 Electrical and electronic systems .
...