|
oSIST prEN 10025-1:2014
01-julij-2014
9URþHYDOMDQLL]GHONLL]NRQVWUXNFLMVNLKMHNHOGHO6SORãQR
Hot rolled products of structural steels - Part 1: General
Warmgewalzte Erzeugnisse aus Baustählen - Teil 1: Allgemeines
Produits laminés à chaud en aciers de construction - Partie 1 : Générales
Ta slovenski standard je istoveten z: prEN 10025-1
ICS:
77.140.10 Jekla za toplotno obdelavo Heat-treatable steels
77.140.50 3ORãþDWLMHNOHQLL]GHONLLQ Flat steel products and semi-
SROL]GHONL products
oSIST prEN 10025-1:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 10025-1:2014
---------------------- Page: 2 ----------------------
oSIST prEN 10025-1:2014
EUROPEAN STANDARD
WHITE DRAFT
prEN 10025-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2014
ICS 77.140.10; 77.140.50 Will supersede EN 10025-1:2004
English Version
Hot rolled products of structural steels - Part 1: General
Produits laminés à chaud en aciers de construction - Partie Warmgewalzte Erzeugnisse aus Baustählen - Teil 1:
1 : Générales Allgemeines
This draft European Standard is submitted to ECISS/COCOR before submission to CEN members for formal vote. It has been drawn up by
the Technical Committee ECISS/TC 103.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10025-1:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 10025-1:2014
prEN 10025-1:2014 (E)
Contents
Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .5
4 Product characteristics .5
4.1 General .5
4.2 Dimensions, tolerances on dimensions and shape .6
4.3 Mechanical properties (yield strength, tensile strength, elongation and impact strength) .6
4.4 Weldability .6
4.5 Durability (chemical composition) .6
4.6 Dangerous substances .6
5 Testing, assessment and sampling methods .7
5.1 Tolerances on dimensions and shape .
...