|
oSIST prEN ISO 15004-2:2014
01-maj-2014
2IWDOPLþQLLQVWUXPHQWL2VQRYQH]DKWHYHLQSUHVNXVQHPHWRGHGHO =DãþLWD
SUHGQHYDUQRVYHWORER ,62',6
Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light
hazard protection (ISO/DIS 15004-2:2014)
Ophthalmische Instrumente - Grundlegende Anforderungen und Prüfverfahren - Teil 2:
Schutz gegen Gefährdung durch Licht (ISO/DIS 15004-2:2014)
Instruments ophtalmiques - Exigences fondamentales et méthodes d'essai - Partie 2:
Protection contre les dangers de la lumièrePlus de détails (ISO/DIS 15004-2:2014)
Ta slovenski standard je istoveten z: prEN ISO 15004-2
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
oSIST prEN ISO 15004-2:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 15004-2:2014
---------------------- Page: 2 ----------------------
oSIST prEN ISO 15004-2:2014
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15004-2
ISO/TC 172/SC 7 Secretariat: DIN
Voting begins on: Voting terminates on:
2014-02-20 2014-07-20
Ophthalmic instruments — Fundamental requirements
and test methods —
Part 2:
Light hazard protection
Instruments ophtalmiques — Exigences fondamentales et méthodes d’essai —
Partie 2: Protection contre les dangers de la lumière
[Revision of first edition (ISO 15004-2:2007)]
ICS: 11.040.70
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15004-2:2014(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2014
---------------------- Page: 3 ----------------------
oSIST prEN ISO 15004-2:2014
ISO/DIS 15004-2:2014(E)
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as
permitted under the applicable laws of the user’s country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [email protected]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2014 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 15004-2:2014
ISO/DIS 15004-2
Contents Page
Foreword . v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and symbols . 1
3.1 Terms and definitions . 1
3.2 Symbols . 5
4 Classification .
...