prEN 1317-5

Road restraint systems - Part 5: Product requirements, test and assessment methods and acceptance criteria

prEN 1317-5

Name:prEN 1317-5   Standard name:Road restraint systems - Part 5: Product requirements, test and assessment methods and acceptance criteria
Standard number:prEN 1317-5   language:English language
Release Date:22-Sep-2015   technical committee:CEN/TC 226 - Road equipment
Drafting committee:CEN/TC 226/WG 1 - Crash barriers, safety fences, guard rails and bridge parapets   ICS number:13.200 - Accident and disaster control
SLOVENSKI STANDARD
oSIST prEN 1317-5:2014
01-februar-2014
Oprema cest - 5. del: Zahteve za proizvode, preskusi in metode ocenjevanja ter
merila sprejemljivosti za sisteme za zadrževanje vozil
Road restraint systems - Part 5: Product requirements, test and assessment methods
and acceptance criteria
Rückhaltesysteme an Straßen - Teil 5: Anforderungen an die Produkte,
Konformitätsverfahren und -bescheinigung für Fahrzeugrückhaltesysteme
Ta slovenski standard je istoveten z: prEN 1317-5
ICS:
13.200 3UHSUHþHYDQMHQHVUHþLQ Accident and disaster control
NDWDVWURI
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
oSIST prEN 1317-5:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1317-5:2014

---------------------- Page: 2 ----------------------
oSIST prEN 1317-5:2014


EUROPEAN STANDARD
DRAFT
prEN 1317-5
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2013
ICS 13.200; 93.080.30 Will supersede EN 1317-5:2007+A2:2012
English Version
Road restraint systems - Part 5: Product requirements, test and
assessment methods and acceptance criteria
 Rückhaltesysteme an Straßen - Teil 5: Anforderungen an
die Produkte, Konformitätsverfahren und -bescheinigung für
Fahrzeugrückhaltesysteme
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 226.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1317-5:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1317-5:2014
prEN 1317-5:2013 (E)
Contents
Page
Foreword .4
Introduction .6
1 Scope .7
2 Normative references .7
3 Terms, definitions, symbols and abbreviations .9
3.1 Terms and definitions .9
3.2 Symbols and abbreviations . 10
4 Requirements . 10
4.1 Safety barriers . 10
4.2 Crash cushions . 15
4.3 Terminals .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27