prEN ISO 80369-2

Small bore connectors for liquids and gases in healthcare applications - Part 2 - Connectors for respiratory applications

prEN ISO 80369-2

Name:prEN ISO 80369-2   Standard name:Small bore connectors for liquids and gases in healthcare applications - Part 2 - Connectors for respiratory applications
Standard number:prEN ISO 80369-2   language:English language
Release Date:02-Mar-2017   technical committee:CEN/CLC/TC 3 - Quality management and corresponding general aspects for medical devices
Drafting committee:CEN/CLC/TC 3 - Quality management and corresponding general aspects for medical devices   ICS number:11.040.10 - Anaesthetic, respiratory and reanimation equipment
SLOVENSKI STANDARD
oSIST prEN ISO 80369-2:2021
01-julij-2021
Priključki z majhnim premerom za tekočine in pline za uporabo v zdravstvu - 2. del:
Priključki za respiratorno uporabo (ISO/DIS 80369-2:2021)
Small-bore connectors for liquids and gases in healthcare applications - Part 2:
Connectors for respiratory applications (ISO/DIS 80369-2:2021)
Verbindungsstücke mit kleinem Durchmesser für Flüssigkeiten und Gase in
medizinischen Anwendungen - Teil 2: Verbindungsstücke für Atemsysteme und
Antriebsgasanwendungen (ISO/DIS 80369-2:2021)
Raccords de petite taille pour liquides et gaz utilisés dans le domaine de la santé - Partie
2: Raccords destinés à des applications respiratoires (ISO/DIS 80369-2:2021)
Ta slovenski standard je istoveten z: prEN ISO 80369-2
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
oSIST prEN ISO 80369-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 80369-2:2021

---------------------- Page: 2 ----------------------
oSIST prEN ISO 80369-2:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 80369-2
ISO/TC 210 Secretariat: ANSI
Voting begins on: Voting terminates on:
2021-05-03 2021-07-26
Small-bore connectors for liquids and gases in healthcare
applications —
Part 2:
Connectors for respiratory applications
ICS: 11.040.20; 11.040.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 80369-2:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021

---------------------- Page: 3 ----------------------
oSIST prEN ISO 80369-2:2021
ISO/DIS 80369-2:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 80369-2:2021
ISO/DIS 80369-2:2021(E)

Contents Page
Foreword .iv
Introduction .v
1 * Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 General requirements . 3
4.1 General requirements for the respiratory application . 3
4.2 Material used for small-bore connectors . 3
4.3 Type tests .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27