|
oSIST prEN 15004-10:2015
01-marec-2015
9JUDMHQLJDVLOQLVLVWHPL6LVWHPL]DJDãHQMHVSOLQRPGHO )L]LNDOQHODVWQRVWL
LQQDþUWRYDQMHVLVWHPD]DJDãHQMHVSOLQRP]DJDVLOR,*
Fixed firefighting systems - Gas extinguishing systems - Part 10: Physical properties and
system design of gas extinguishing systems for IG-55 extinguishant
Ortsfeste Brandbekämpfungsanlagen - Löschanlagen mit gasförmigen Löschmitteln -
Teil 10: Physikalische Eigenschaften und Anlagenauslegung für Feuerlöschmittel IG-541
Installations fixes de lutte contre l’incendie - Installations d’extinction à gaz - Partie 10:
Propriétés physiques et conception des systèmes pour agent extincteur IG-541
Ta slovenski standard je istoveten z: prEN 15004-10
ICS:
13.220.20 3RåDUQD]DãþLWD Fire protection
oSIST prEN 15004-10:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15004-10:2015
---------------------- Page: 2 ----------------------
oSIST prEN 15004-10:2015
EUROPEAN STANDARD
DRAFT
prEN 15004-10
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2014
ICS 13.220.20 Will supersede EN 15004-10:2008
English Version
Fixed firefighting systems - Gas extinguishing systems - Part 10:
Physical properties and system design of gas extinguishing
systems for IG-55 extinguishant
Installations fixes de lutte contre l'incendie - Installations Ortsfeste Brandbekämpfungsanlagen - Löschanlagen mit
d'extinction à gaz - Partie 10: Propriétés physiques et gasförmigen Löschmitteln - Teil 10: Physikalische
conception des systèmes pour agent extincteur IG-541 Eigenschaften und Anlagenauslegung für Feuerlöschmittel
IG-541
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 191.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15004-10:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15004-10:2015
prEN 15004-10:2014 (E)
Contents
Page
Foreword .3
1 Scope .3
2 Normative references .3
3 Terms and definitions .3
4 Characteristics and uses .4
4.1 General .4
4.2 Use of IG-541 systems .5
5 Safety of personnel. 10
6 System design .
...