|
oSIST prEN 15746-1:2016
01-februar-2016
äHOH]QLãNHQDSUDYH=JRUQMLXVWURM'YRSRWQDåHOH]QLãNDYR]LODLQRSUHPDGHO
7HKQLþQH]DKWHYH]DYRåQMRLQGHORYDQMH
Railway applications - Track - Road rail machines and associated equipment - Part 1:
Technical requirements for travelling and working
Bahnanwendungen - Oberbau - Zwei-Wege Maschinen und zugehörige Ausstattung -
Teil 1: Technische Anforderungen an das Fahren und den Arbeitseinsatz
Ta slovenski standard je istoveten z: prEN 15746-1
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
oSIST prEN 15746-1:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15746-1:2016
---------------------- Page: 2 ----------------------
oSIST prEN 15746-1:2016
DRAFT
EUROPEAN STANDARD
prEN 15746-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2015
ICS 93.100 Will supersede EN 15746-1:2010+A1:2011
English Version
Railway applications - Track - Road rail machines and
associated equipment - Part 1: Technical requirements for
travelling and working
Bahnanwendungen - Oberbau - Zwei-Wege Maschinen
und zugehörige Ausstattung - Teil 1: Technische
Anforderungen an das Fahren und den Arbeitseinsatz
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15746-1:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15746-1:2016
prEN 15746-1:2015 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
1.1 General . 7
1.2 Validity of this European Standard . 8
2 Normative references . 8
3 Terms and definitions . 10
4 Machine categorization . 14
4.1 Categories . 14
4.1.1 General . 14
4.1.2 Example of Category 8 machine .
...