prEN ISO 17225-8

Solid biofuels - Fuel specifications and classes - Part 8: Graded thermally treated and densified biomass fuels (ISO/DIS 17225-8:2016)

prEN ISO 17225-8

Name:prEN ISO 17225-8   Standard name:Solid biofuels - Fuel specifications and classes - Part 8: Graded thermally treated and densified biomass fuels (ISO/DIS 17225-8:2016)
Standard number:prEN ISO 17225-8   language:English language
Release Date:21-Aug-2017   technical committee:CEN/TC 335 - Solid biofuels
Drafting committee:CEN/TC 335 - Solid biofuels   ICS number:27.190 - Biological sources and alternative sources of energy
SLOVENSKI STANDARD
oSIST prEN ISO 17225-8:2016
01-marec-2016
7UGQDELRJRULYD6SHFLILNDFLMHLQUD]UHGLJRULYGHO6RUWLUDQDWHUPLþQR
REGHODQDLQ]JRãþHQDJRULYDL]ELRPDVH ,62',6
Solid biofuels - Fuel specifications and classes - Part 8: Graded thermally treated and
densified biomass fuels (ISO/DIS 17225-8:2016)
Biogene Festbrennstoffe - Brennstoffspezifikationen und -klassen - Teil 8: Klassifizierung
von thermisch behandelten und gepressten Brennstoffen aus Biomasse (ISO/DIS 17225-
8:2016)
Biocombustibles solides - Classes et spécifications des combustibles - Partie 8 (ISO/DIS
17225-8:2016)
Ta slovenski standard je istoveten z: prEN ISO 17225-8
ICS:
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
75.160.10 Trda goriva Solid fuels
oSIST prEN ISO 17225-8:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 17225-8:2016

---------------------- Page: 2 ----------------------
oSIST prEN ISO 17225-8:2016
DRAFT INTERNATIONAL STANDARD
ISO/DIS 17225-8
ISO/TC 238 Secretariat: SIS
Voting begins on: Voting terminates on:
2016-01-14 2016-04-14
Solid biofuels — Fuel specifications and classes —
Part 8:
Graded thermally treated and densified biomass fuels
Biocombustibles solides — Classes et spécifications des combustibles
ICS: 27.190; 75.160.10
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 17225-8:2015(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2015

---------------------- Page: 3 ----------------------
oSIST prEN ISO 17225-8:2016
ISO/DIS 17225-8:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
[email protected]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 17225-8:2016
ISO/DIS 17225-8:2015
Contents
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviations . 3
5 Specification of graded pellets produced from thermally treated biomass . 4
6 Specification of graded briquettes produced from thermally treated bioma
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27