|
oSIST prEN 10219-1:2016
01-februar-2016
Hladno oblikovani varjeni votli konstrukcijski profili iz jekla - 1. del: Splošno
Cold formed welded structural steel hollow sections - Part 1: General
Kaltgeformte geschweißte Hohlprofile für den Stahlbau - Teil 1: Allgemeines
Profils creux de construction soudés formés à froid en aciers - Partie 1 : Généralités
Ta slovenski standard je istoveten z: prEN 10219-1
ICS:
77.140.45 Nelegirana jekla Non-alloyed steels
77.140.70 Jekleni profili Steel profiles
oSIST prEN 10219-1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 10219-1:2016
---------------------- Page: 2 ----------------------
oSIST prEN 10219-1:2016
DRAFT
EUROPEAN STANDARD
prEN 10219-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2016
ICS 77.140.75 Will supersede EN 10219-1:2006
English Version
Cold formed welded structural steel hollow sections - Part
1: General
Profils creux de construction soudés formés à froid en Kaltgeformte geschweißte Hohlprofile für den Stahlbau
aciers - Partie 1 : Généralités - Teil 1: Allgemeines
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
ECISS/TC 103.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10219-1:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 10219-1:2016
prEN 10219-1:2016 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
3.1 Terms and definitions . 5
3.2 Symbols . 6
4 Product characteristics . 6
4.1 Chemical composition (durability) . 6
4.2 Mechanical properties (yield strength, tensile strength, elongation and impact
strength) . 6
4.3 Weldability . 6
4.4 Tolerances on dimensions and shape .
...