|
SLOVENSKI STANDARD
oSIST prEN 3841-100:2022
01-julij-2022
Aeronavtika - Odklopniki - Preskusne metode - 100. del: Splošno
Aerospace series - Circuit breakers - Test methods - Part 100: General
Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil 100: Allgemeines
Série aérospatiale - Disjoncteurs - Méthodes d’essais - Partie 100 : Généralités
Ta slovenski standard je istoveten z: prEN 3841-100
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3841-100:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 3841-100:2022
oSIST prEN 3841-100:2022
DRAFT
EUROPEAN STANDARD
prEN 3841-100
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2022
ICS 49.060 Will supersede EN 3841-100:2004
English Version
Aerospace series - Circuit breakers - Test methods - Part
100: General
Série aérospatiale - Disjoncteurs - Méthodes d'essais - Luft- und Raumfahrt - Schutzschalter - Prüfverfahren -
Partie 100 : Généralités Teil 100: Allgemeines
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3841-100:2022 E
worldwide for CEN national Members.
oSIST prEN 3841-100:2022
prEN 3841-100:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Conditions for test . 4
4.1 Environmental conditions . 4
4.2 Mounting conditions for mechanical tests . 4
4.3 Mounting conditions for thermal tests . 5
4.4 Connection requirements for electrical tests . 5
5 List of test methods . 6
Bibliography . 8
oSIST prEN 3841-100:2022
prEN 3841-100:2022 (E)
European foreword
This document (prEN 3841-100:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 384
...