FprEN ISO 23500-1

Preparation and quality management of fluids for haemodialysis and related therapies - Part 1: General requirements (ISO/FDIS 23500-1:2024)

FprEN ISO 23500-1

Name:FprEN ISO 23500-1   Standard name:Preparation and quality management of fluids for haemodialysis and related therapies - Part 1: General requirements (ISO/FDIS 23500-1:2024)
Standard number:FprEN ISO 23500-1   language:English language
Release Date:16-Jul-2024   technical committee:CEN/TC 205 - Non-active medical devices
Drafting committee:CEN/TC 205 - Non-active medical devices   ICS number:11.040.40 - Implants for surgery, prosthetics and orthotics
SLOVENSKI STANDARD
oSIST prEN ISO 23500-1:2023
01-januar-2023
Priprava in vodenje kakovosti tekočin za hemodializo in podobne terapije - 1. del:
Splošne zahteve (ISO/DIS 23500-1:2022)
Preparation and quality management of fluids for haemodialysis and related therapies -
Part 1: General requirements (ISO/DIS 23500-1:2022)
Herstellung und Qualitätsmanagement von Flüssigkeiten für die Hämodialyse und
verwandte Therapien - Teil 1: Allgemeine Anforderungen (ISO/DIS 23500-1:2022)
Préparation et management de la qualité des liquides d'hémodialyse et de thérapies
annexes - Partie 1: Exigences générales (ISO/DIS 23500-1:2022)
Ta slovenski standard je istoveten z: prEN ISO 23500-1
ICS:
11.040.40 Implantanti za kirurgijo, Implants for surgery,
protetiko in ortetiko prosthetics and orthotics
oSIST prEN ISO 23500-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 23500-1:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 23500-1:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 23500-1
ISO/TC 150/SC 2 Secretariat: ANSI
Voting begins on: Voting terminates on:
2022-11-17 2023-02-09
Preparation and quality management of fluids for
haemodialysis and related therapies —
Part 1:
General requirements
Préparation et management de la qualité des liquides d'hémodialyse et de thérapies annexes —
Partie 1: Exigences générales
ICS: 11.040.40
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 23500-1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 23500-1:2023
ISO/DIS 23500-1:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 23500-1
ISO/TC 150/SC 2 Secretariat: ANSI
Voting begins on: Voting terminates on:

Preparation and quality management of fluids for
haemodialysis and related therapies —
Part 1:
General requirements
Préparation et management de la qualité des liquides d'hémodialyse et de thérapies annexes —
Partie 1: Exigences générales
ICS: 11.040.40
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [email protected]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 23500-1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 23500-1:2023
ISO/DIS 23500-1:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27