1. The voltage generated by wind turbines is "inherently" unstable.
2. A "12V/12Ah~12V/20Ah" lead-acid battery can be connected to the output end of the wind turbine to "stabilize the voltage".
3. You can purchase a "12V/5V" "car charger" voltage regulator.
In this way, what you require is achieved: (1) Voltage stabilization. (2) The output terminal has obtained a "regulated output" of 5V.
I made a DC wind turbine, but I don’t know how to stabilize the voltage to 5v. The minimum power generation is 3v and the maximum is 16v. Ask for a circuit diagram
The principles of the two are the same. In theory, it is possible to use them both, but there are still certain differences in the structure of actual DC motors and DC generators. And you can’t do this. , the electric start motor of a motorcycle is a short-time running motor. It is designed to work for a few seconds and then stop. If you let it run for a long time, it will break.
Wind power generation The machine must be used in conjunction with the battery to ensure the stability and practicality of its voltage.
When there is wind, the generator charges the storage battery, and when there is no wind, the electric energy stored in the storage battery is used.
The circuit is a voltage stabilizing circuit composed of an ordinary 7805.