The original intention of the owner to purchase the generator set is to enable the generator set to function at critical moments. To achieve this goal, in addition to the maintenance work of the generator set, there are also many issues that need to be paid attention to during the installation of the generator set. Let’s do it today. Let me tell you what you need to pay attention to when installing the generator set.
1. The installation site must be well ventilated. The air inlet at the generator end of the generator set is in good condition, and the air outlet at the diesel engine end is in good air condition. The air outlet area of the diesel engine should be at least 1.5 times larger than the water tank area.
2. The area around the installation site should be kept clean, and items that can generate corrosive gases or vapors such as acid and alkaline should be avoided nearby. If possible, fire extinguishing devices can be equipped.
3. When used indoors, the exhaust pipe of the generator set must be led to the outdoors. The diameter of the pipe must be larger than the diameter of the smoke outlet pipe of the silencer. The pipe should be inclined downward by 5-10 degrees to avoid rainwater injection. , Corrosion pipes. If the exhaust pipe is installed vertically upward, a rainproof device must be installed.
4. If the fixed platform is made of concrete, a level ruler must be used to measure the level of the fixed platform during installation of the generator set so that the generator set can be fixed in a horizontal position. Special anti-vibration pads or foot bolts should be installed between the generator set and the fixed platform.
5. The generator set shell must have reliable grounding protection. Generators whose neutral point is directly grounded must be neutrally grounded by professional installers.
6. When the generator set is used together with the mains, the reliability of the two-way switch wiring between the generator and the mains must be inspected and approved by the local power supply department to prevent reverse power transmission.