The principle of wind power generation is to use wind energy to rotate the blades of the wind turbine, and then use a speed multiplier to increase the rotation speed to incentivize the generator to produce electricity. Depending on wind turbine technology, electricity production can begin at a wind speed of around three meters per second.
The wind turbine, also known as the windmill, can be roughly divided into three parts: the wind wheel, the generator and the tower. Each part is very important. The wind wheel is an important element that converts the kinetic energy of the wind into mechanical energy. It is made up of several blades. Generators are often called induction motors or asynchronous generators, and their maximum electrical output is usually 500 to 1,500 kilowatts. The iron pillar is the structure that supports the wind wheel, the tail rudderand the generator. Generally, they are built higher to achieve greater and more uniform wind force.
Nowadays, wind energy production is generating enthusiasm around the world. Wind power generation poses no fuel problems and does not produce radiation or air pollution. It is a good way to produce electricity.
Wind turbine wiring method:
The first step is to purchase a plug. The power of the outlet depends on the power of the equipment to be brought. First, use a razor blade to open the plug cover that came with the generator. Remove the cover again and you will see that there are three pillars inside the generator plug. Two of the pillars are the same length and one pillar is much longer than the other two pillars.
The second step is to connect the wiring to two pillars of the same length. Given thatThe socket has two wires, one is the neutral wire and the other is the live wire. At this point, you just need to replace the plug in the regular outlet with the special generator plug. At this point, simply connect the wire from the outlet you purchased to the generator plug. The two wires are connected to the two pillars circled in red.
The last step is to use the two screws on the pillar to secure the wire. If you want to connect the generator power to the mains, you need to connect the generator plug wire. mains and you do not need to buy a socket at the moment.