First use a Phillips screwdriver and special tools to remove the air filter; use a Phillips screwdriver to remove the front grille;
Use tools to loosen the generator bracket and generator bolts, then remove generator belt;
Use tools to loosen the A/C compressor bracket bolts and remove the compressor belt;
Use a flathead screwdriver to secure the flywheel; also use a tool; to loosen the crankshaft pulley bolt and remove the bolt; the pulley should be easily removed at this point.
The Roewe 360 has several USB sockets, Roewe 360 USB location diagram
The method of removing the generator belt is as follows:
1. Disassembly by knocking method: use a hammer or punch to place a soft pad on it, apply pressure statical or the greater force generated by the interaction between the disassembly tool and the parts on the parts, and disassemble the parts.
2. Disassembly by pulling method: use the impact of the weight of the pin puller to generate impact force, remove the taper pin from the mating part, then disassemble the shaft end parts and the sleeve in sequence.
Roewe 360 has a USB port. The functions of the Roewe 360 USB port are: 1. Insert a USB flash drive to play songs. 2. Charge the mobile phone. 3. USB car cigarette lighter. 4. Car vacuum cleaner. 5. Electronic dog, driving recorder. There are many functions, but using too many electrical appliances will damage the battery and generator due to excessive charging, which is not worth the loss. The location map of the Roewe 360usb is as follows: There are many USB interfaces to seeure to transmit audio data. The current of the car USB interface is both 5V/2.1A and 5V/0.5A. The input current required by many mobile phones is 5V/1A, and 5V/2.1A car USB is of course no problem. At present, it can input 1A current to the mobile phone and 2A current to the tablet. If it is 5V/0.5A, obviously the current will not meet the standard. In this case, charging the cell phone will not only take a long time, but will also make it hot.