HPCU5L20-6MB Hy-Pro Filtration

The bag filter refers to the dust attached to the filter medium (bag or filter cartridge) by spraying the compressed air; a few sets of pulse valve may be controlled according to the size of the dust collector, controlled by a pulse controller or PLC, each time A set of pulse valves to remove the part of the part of the bag or filter cartridge it control, while other bag or filter cartridges work normally, open a set of pulse valves after a period of time, clean up the next part of the dust collector by the gray bucket, The box, medium case, lower case, etc. are composed, upper, medium, and lower boxes are bore chamber structures. When working, the dust-containing gas is passed into the gray bucket from the air, and the coarse dust falls directly into the bottom of the gray bucket. Gas enters the upper box to the purge assembly tube - the exhaust tract, the exhaust fan is discharged to the atmosphere. The cleaning process is to first cut the rink of the room, so that the bag of the chamber is in a stateless passage (branching the wind and ash). The pulse valve is then turned on with compressed air, and the shut-off time is sufficient to ensure that the dust is depressed from the filter bag after blowing, avoiding dust from the surface of the filter bag and attached to the gas flow. To the surface of adjacent filter bag, the filter bag is completely completely controlled by the programs, pulse valves, and unloading valves, etc. The dust-containing gas is entered by the vent. When the flute is derived, some of the large particles in the gas are separated and gravity acts, and directly fall into the bottom of the dumping. The dust-containing gas enters the filter bag filter area of the box body, the gas passes through the filter bag, and the dust is retained outside the outer surface of the filter bag. After the purified gas is entered into the box, after entering the box, then The vent is discharged.