Due to the instability of the grid voltage (especially in China), when the voltage at the wind turbine connection point drops, the wind turbine can remain connected to the grid and even provide a certain amount of reactive power to the grid to support the recovery of the grid until the grid returns to normal. Thus "crossing" this low voltage time (region). This can ensure continuous network connection, protect the power grid and protect the wind turbines.
How to use SD7000 release agent when converting a balancing car into a wind turbine that does not rotate quickly? According to the query of relevant public information, the balance car converted into a wind turbine did not rotate fast, and the tooling was tested in the air. After the tooling was tested correctly, the inner surface of the tooling was cleaned with absolute ethanol, and then SD7000 release agent was applied, and Sole Carbon Nano was blended as usual. The polymer material is blended until it is uniform and has no color difference, and then the blended material is evenly applied to the surface of the shaft, scraped and pressed repeatedly, and the tooling is installed until the material solidifies. Then the tooling is disassembled to check the size after repair, and the repair is completed by installing the bearing.