It is not cost-effective to use wind turbines to drive motor loads such as air conditioners, because starting the motor requires a large current, so the wind power generation system that loads the motor requires energy storage equipment (battery) and an inverter power supply. , the cost is very high, and the maintenance cost is also high, especially maintenance is not done by ordinary people and requires professional technicians.
When repairing a wind turbine, how do you climb up from the outside or from the inside?
There are certain risks, mainly from two aspects. One is the safety of using electricity. Before doing anything, Be sure to confirm that the power is off, and you must not operate it in thunderstorms. Second, working at high altitudes is dangerous. You need to climb the tower, which is about 70 or 80 meters. There are usually climbing aids. You must not climb on windy days. As long as you pay attention to these two points, you'll be fine.
Some are inside and some are outside, it depends on the form and size of the tower. The towers of large wind turbines are relatively thick. Generally, you can go up from the internal hoist or ladder and directly enter the engine room of the wind turbine (the engine room cover can be opened from the inside). Another method is to climb to the maintenance platform from the outside using a ladder. Small and medium-sized wind turbines are generally repaired by crane or by placing them on a tower.