Above the generator.
Shifengfengjun 1460J regulator, this one is on the generator. The regulator is where the live wire screw is installed behind the generator.
It is cheap, has strong carrying capacity and low fuel consumption, and is deeply loved by the general public. Powered by a Shifeng 34-horsepower diesel engine, the carriage length is 2.7 meters, the width is 1.6 meters, and the railing height is 0.5 meters.
How to install the Great Wall Fengjun five accessory booster pump belt
First check whether the excitation circuit is broken and whether the fuse is burned out.
If the machine does not generate electricity, it may be a problem with the generator or the generator relay. The engine is burning oil, or the oil pressure is insufficient, etc. For reference only, as for the engine oil light that stays on, it may be due to lack of engine oil. After replacing the wastegate valve, the Great Wall Fengjun 6 diesel pickup truck sped away, causing the engine to not start properly, vibrating and making abnormal noises, and the idle motor of the car was above the throttle transmitter. It is mainly used to bear the idling speed of the car. Its purpose is to adjust the idling speed according to the engine load at idling speed. If the idling speed jitters, you can check the pointer fluctuation of the idle speed meter, which generally indicates poor combustion.
The installation method of the Great Wall Fengjun five-accessory booster pump belt is as follows:
1. Pull out the generator main shaft to facilitate subsequent winding of the belt.
2. Adjust the position of the generator main shaft.
3. The two idler wheels of the generator are pulled outward.
4. Wrap the belt around the idler pulley of the generator.