The steps to use WiFi Master Key on Apple mobile phones are as follows:
1. You need to go to the website to download the genuine and secure WiFi Master Key software and install it. on your cell phone.
2. Wait for the installation to complete and enable “Data Cellular” or “WiFi Network” and “Location Services”.
3. Open the WiFi settings on your phone, wait for the phone to automatically search for WiFi network in the local area and save the screenshot to your phone.
4. After saving, open the WiFi Master Key software, enter the page, click behind the search bar to enter, and paste what you just recorded there.
5. After pasting, the phone will automatically search and scan the WiFi network. Once the results are displayed, select the network with the blue button behind it and click on the link.
TheiPad can use WiFi master key. However, the non-3G version of the iPad cannot use the data connection. If you want to use it, you need to share the hotspot with your mobile phone on the iPad. After the iPad gets the password, the mobile phone can cancel the WiFi hotspot. .
The following is the official method of using the iOS version of WiFi Master Key:
1. Please make sure WiFi or cellular data is enabled in settings (iPad does). you don't have a data connection, but don't worry), just connect to the hotspot shared by the mobile phone) and make sure to enable location service;
2. on the WiFi master key and wait for a while to get the list of surrounding WiFi hotspots. If it does not appear, you can go to the Expand page to refresh
3. to matchndre the WiFi scanned by the phone with the WiFi master key to show the blue key.
(1) Set WiFi list in phone settings and press and hold home button + power button at the same time to take a screenshot (if the phone scans more than WiFi, you can take multiple screenshots to cover all WiFi information);
(2) Return to the WiFi master key interface, click Scan to get the WiFi list information from the previous screenshot, scan and match them one by one, and a blue key will appear. appear in hotspots with shared passwords.
4. Click the access point that displays the blue key to continue installing the description file. Once the description file is installed, everything will be fine;
The iOS system requires it when. installation of an application (description file) Enter thelock screen password to confirm again, please enter the mobile phone lock screen password
Set mobile phone personal hotspot
1
< p>Because cracking can only be achieved in a network environment, so you must first configure your iPad to connect to the wireless network, which is your own hotspot staff.Make sure data is enabled on your phone, then enter the settings on your phone.
2
Click and open Personal Hotspot to connect your iPad to your Personal Hotspot.
Crack wifi keyPassword
1. Once the iPad is connected to the hotspot, you need to open your own Wi-Fi dongle app.
2. After opening, click on the one-click login option below and you will enter a prompt interface as shown in the figure below. Clickz simply on the link option.
3.
At this point, you will find that the wifi account that can be unlocked appears under Wireless LAN. Click to connect and you will be able to access the Internet.
Reference documents
Sogou Ask.Sogou [Citation time 2018-5-3]