The reasons are as follows:
There are many reasons for the failure of the high voltage assembly of motorcycles, including electrical circuits and power circuits. oil. The best solution is. to replace the high voltage box.
There is no fire in the motorcycle's high voltage package. Check the high voltage package, ECU igniter, magnetic coil and electric door lock for damage and open wiring between them. or shorted if there is no high voltage, piezoelectrics basically have problems in these aspects.
The reasons why there is no high voltage ignition in the motorcycle engine are:
The reasons for the AC ignition system are: a coil d low voltage ignition or a faulty pulse coil and open circuit, short circuit or open circuit of the low voltage ignition line, igniter. The damage, the damages to high pressure packaging will cause a high pressure fire without ignition, which can be resolved through inspection and maintenance.
Causes belonging to DC ignition system include open circuit or short circuit of coil or pulse line, open circuit of DC power line, breakdown and damage of the DC igniter and damage to the high voltage box, which will cause no ignition and fire at high voltage. Inspection and maintenance may resolve the problem.