Yes, but you can only turn on one battery.
The battery of a 24 volt truck is made up of two 12 volt batteries connected in series, in this way the nominal voltage reaches 24 volts, however, if the battery is not broken but only loses. power, then both batteries are exhausted at the same time, so using a 12 volt battery to start the fire will have little effect.
If one of the batteries malfunctions and the voltage is too low, a 12 volt battery can be used to turn on a single power battery to start the vehicle.
Detailed informationPrecautions for starting a fire in a vehicle:
1. The battery connection wire used should be thick wire. The current when starting the car is very important. the wire is too thin, it will cause the wire to overheat.
2. When building a fire, make sure the positive poles and borngatives of the connection match. Do not connect the positive and negative poles backwards. cause damage to the electronic components of the vehicle, or even the disposal of the battery.
3. After starting the car, the power generated by the car's generator is not enough to fully charge the battery. The vehicle must be charged with a charger to avoid repeating this problem the next time it is started. .
Caused by generator failure.
After your car catches fire, check to see if the battery light on the instrument is still on. If it is on, the generator does not produce electricity. If your battery is dead, it may be because the generator is not producing electricity. If the charge is insufficient, check the regulator, magnetic field circuit fuse, brush, etc. If there is no problem, the generator may be broken.