It is possible that the car's ignition switch is broken. The ignition switch has the ACC position, the ON position, and the START position. Turning on the ACC position is to connect the car's electrical equipment, such as audio, lights, etc. The ON position is to connect the ABS (anti-lock braking system), AIRBAG (airbag), oil pump and operating power to the car's ECU. And START means to begin. If the car cannot stop turning on, the most likely reason is that the car's ignition switch is broken.
For detailed answers, it is recommended to go to the 4S store to see a maintenance technician.
Typically, the button under the key of a gasoline generator is designed as a shutdown button.
In addition to flash ignition, engines with too high a compression ratio may also experience an autre problem: surface ignition. This is another type of abnormal combustion (also called hot ignition or pre-ignition) caused by the ignition of the mixture between hot surfaces and hot places in the cylinder (such as the exhaust valve heads , spark plug electrodes and carbon deposits). When shallow ignition occurs, it is also accompanied by a loud knocking noise from the cylinder (which is dull). The high pressure generated will increase the engine load and shorten the service life.
Gasoline generators are generally composed of stators, rotors, end covers, bearings and other components. The engine is a machine that converts chemical energy into mechanical energy. Its conversion process is actually the process of work cycle, it burns the fuel in the cylinder to generate kinetic energy, which drives the piston of the engine cylinder to effectmake an alternative movement. It drives the connecting rod connected to the piston and the crank connected to the connecting rod to reciprocate in a circular motion around the center of the crankshaft to produce power.
The stator consists of the stator core, wire windings, machine base and other structural parts that secure these parts. The rotor is composed of rotor core winding (or magnetic pole, magnetic yoke), retaining ring, center ring, slip ring, fan and a rotating shaft. The stator and rotor of the generator are connected and assembled by the bearings and end covers, so that the rotor can rotate in the stator and carry out the cutting movement of the magnetic lines of force, thereby generating induced electric potential, which is evacuated. across the terminals and connected in the circuit to generate current.
In addition to the flash ignition, the mEngines with too high a compression ratio may also face another problem: surface ignition. This is another type of abnormal combustion (also called hot ignition or pre-ignition) caused by the ignition of the mixture between hot surfaces and hot places in the cylinder (such as the exhaust valve heads , spark plug electrodes and carbon deposits). When shallow ignition occurs, it is also accompanied by a loud knocking noise from the cylinder (which is dull). The high pressure generated will increase the engine load and shorten the service life.